HS146000E Handheld Three-Phase Power Quality and Energy Analyzer

Reference: HS146000E
Brand: HenSistemas

The HS146000E handheld three-phase power quality analyzer with CT offers the best capability in power quality analysis: it helps locate, predict, prevent and troubleshoot power quality problems in three-phase and single-phase power distribution systems.

It also offers a patented energy loss algorithm, unified power measurement, and measuring and counting of energy losses due to harmonics and unbalance issues, allowing the user to pinpoint the origin of energy losses in the system.

Price on request

No sign-up. You review the list and send it when you are ready.

HS146000E

Torn between two models?

Electrical parameters — voltage rms, ava, pk+, pk-, rms-1/2, CF
Electrical parameters — frequency Freq
Electrical parameters — current rms, ava, pk+, pk-, rms-1/2, CF
Electrical parameters — power and energy P, S, Q, PF, DPF, W
Electrical parameters — compilation THD, DC, 1-50 Harm, 1-50 InHarm, 1-35 HiHarm, 1-50 SubHarm
Electrical parameters — harmonic voltage THD, DC, 1-50 Harm, 0-49 InHarm, 1-35 HiHarm, 1-50 SubHarm, KF

Overview

Features

3s statistical interval, with continuous recording for 120h
Supports multi-brand current transformers
Up to 8G of data storage space
Records up to 461 power and energy parameters simultaneously
Up to 6500 screenshots saved
Periodic recording function
USB high-speed transfer of up to 3.9M/s
Customized international report generation

Functions

Energy loss calculator: classic active and reactive power measurements, unbalance and harmonic power are quantified to pinpoint true system energy losses in dollars (other local currencies available).
Power inverter efficiency: simultaneously measures AC output power for power electronics systems.
Power wave data capture: HS146000E analyzers capture fast RMS data and show half-cycles and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Waveform capture: the HS146000E captures 50/60 cycles (50/60Hz) of each event detected in all modes, without set-up.
Automatic transients: HS146000E analyzers capture 200 kHz waveform data on all phases simultaneously, up to 1000V.
Fully class-A compliant: HS146000E analyzers conduct tests according to the stringent international IEC 61000-4-30 class-A standard.
Mains signaling: the HS146000E analyzer measures interference from ripple control signals at specific frequencies.
Troubleshooting: analyze trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: four flexible current probes included, with enhanced thin flex designed to fit into the tightest places.
Automatic trending: every measurement is always recorded automatically, without any set-up.
System monitor: ten power quality parameters on one screen according to the EN50160 power quality standard.
Logger function: configurable for any test condition, with memory for up to 600 parameters at user-defined intervals.
Graphs and reports: view graphs and generate reports with the included analysis software.
Battery life: up to 5 hours of operating time per charge on the Li-ion battery pack.

Specifications

HS146000E Handheld Three-Phase Power Quality and Energy Analyzer · HS146000E
Property	Value
Electrical parameters — voltage	rms, ava, pk+, pk-, rms-1/2, CF
Electrical parameters — frequency	Freq
Electrical parameters — current	rms, ava, pk+, pk-, rms-1/2, CF
Electrical parameters — power and energy	P, S, Q, PF, DPF, W
Electrical parameters — compilation	THD, DC, 1-50 Harm, 1-50 InHarm, 1-35 HiHarm, 1-50 SubHarm
Electrical parameters — harmonic voltage	THD, DC, 1-50 Harm, 0-49 InHarm, 1-35 HiHarm, 1-50 SubHarm, KF
Electrical parameters — harmonic current	THD, DC, 1-50 Harm
Electrical parameters — harmonic power	Ia, Ib, Ic, ΣPtotal, ΣQtotal, ΣStotal, 15 minutes
Electrical parameters — fluctuation and flicker	PST, PLT, Fluct, Fluct Max
Electrical parameters — unbalance (Unbal)	V pos, A pos, V neg, A neg, A zero, V zero, Unbal
Electrical parameters — event log	Voltage swell, voltage sag, DIP, inrush current, voltage and current distortion out of limit, odd harmonic content out of limit, voltage and current unbalance out of limit, frequency out of limit, PST out of limit, PLT out of limit, long-term voltage interruption, voltage fluctuation deviation
P, Q, S — measurement types	P: calculated every 10 cycles; S: calculated from the RMS value of voltage and current; Q: calculated from apparent power and active power
P, Q, S — display	Table charts, trend chart
P, Q, S — measuring range/resolution	According to the voltage and current range
P, Q, S — measurement accuracy	±0.5%
RMS current (Arms) — measurement mode	Calculated as the root mean square over 10 cycles
RMS current (Arms) — display mode	Current RMS value of each channel
RMS current (Arms) — measuring range/resolution	Current: according to the current clamps. Options: 5A/50A/100A/500A; flexible current clamps: 1200A/3000A/6000A
RMS current (Arms) — accuracy	0.1% + accuracy of the current clamps
Frequency — measurement mode	Calculated every 10 cycles (50Hz) or (60Hz)
Frequency — display mode	Measurement over 10 cycles
Nominal frequency/resolution	50.000Hz/0.001Hz or 60.000Hz/0.001Hz
Frequency — measuring range	42.5-57.5Hz or 52.5-67.5Hz
Frequency — measurement accuracy	±0.001Hz
Half-wave RMS current/voltage — measurement mode	Calculated every 2 cycles; in each cycle, 1/2 cycle made up of one waveform calculation
Half-wave RMS current/voltage — measuring range/resolution	Voltage: 120V/0.01V, 230V/0.01V, 400V/0.01V, 1000V/0.01V; current: according to the current clamps
Half-wave RMS current/voltage — measurement accuracy	±0.1%
RMS voltage (Vrms) — measurement circuit	1P2W / 2P3W / 3P3W / 3P4W
RMS voltage (Vrms) — base frequency of the measurement circuit	50Hz
RMS voltage (Vrms) — input channels	Voltage: 4 phases; current: 4 phases
RMS voltage (Vrms) — measuring range	Voltage: standard 120V, 230V, 400V and 1000V, maximum instantaneous voltage 1000V; current: according to the current clamps (only current clamps with voltage signal output are supported)
Power factor — measurement mode	Ratio between average power and apparent power
Power factor — display mode	Real-time data
Power factor — measuring range/resolution	-1.000-1.000/0.001
Power factor — measurement accuracy	±1%
Harmonics (Vfund, Afund, harmonic power) — measurement mode	Complies with IEC61000-4-7; the analysis time window is ten cycles
Harmonics (Vfund, Afund, harmonic power) — indicator points	5120 points
Harmonics (Vfund, Afund, harmonic power) — display mode	Waveform, trend charts, histograms
Harmonics (Vfund, Afund, harmonic power) — number of measurements	1-50 times
Harmonics (Vfund, Afund, harmonic power) — measurement accuracy	Vfund >1%: error <1%; Vfund <1%: error <0.05% of nominal voltage; Afund >3%: error <1%; Afund <3%: error <0.05% of current range
InHarm voltage, InHarm current — measurement mode	Complies with IEC61000-4-7; the analysis time window is ten cycles
InHarm voltage, InHarm current — indicator points	5120 points
InHarm voltage, InHarm current — display mode	Waveform, trend charts, histograms
InHarm voltage, InHarm current — measurement numbers	1-16 groups
InHarm voltage, InHarm current — measurement accuracy	Vfund >1%: error <1%; Vfund <1%: error <0.05% of nominal voltage; Afund >3%: error <1%; Afund <3%: error <0.05% of current range
HiHarm voltage, HiHarm current — measurement mode	Complies with IEC61000-4-7; the analysis time window is ten cycles
HiHarm voltage, HiHarm current — indicator points	5120 points every 10 cycles
HiHarm voltage, HiHarm current — display mode	Waveform, trend charts, histograms
HiHarm voltage, HiHarm current — measurement numbers	1-35 groups
HiHarm voltage, HiHarm current — measurement accuracy	Vfund >1%: error <1%; Vfund <1%: error <0.05% of nominal voltage; Afund >3%: error <1%; Afund <3%: error <0.05% of current range
Voltage SubHarm, current SubHarm — measurement mode	Complies with IEC61000-4-7; the analysis time window is ten cycles
Voltage SubHarm, current SubHarm — indicator points	5120 points every 10 cycles
Voltage SubHarm, current SubHarm — display mode	Waveform, trend charts, histograms
Voltage SubHarm, current SubHarm — measurement numbers	1-50 groups
Voltage SubHarm, current SubHarm — measurement accuracy	Vfund >1%: error <1%; Vfund <1%: error <0.05% of nominal voltage; Afund >3%: error <1%; Afund <3%: error <0.05% of current range
Voltage/current unbalance (pos, neg) — measurement mode	3P3W or 3P4W, calculated from the fundamental wave components of the three phases
Voltage/current unbalance (pos, neg) — display mode	Waveform, trend charts, histograms
Voltage/current unbalance (pos, neg) — measurement accuracy	Voltage unbalance: ±0.2%; current unbalance: ±0.5%
Voltage fluctuation — measurement mode	Calculated from the half-wave root mean square
Voltage fluctuation — display mode	Waveform, trend charts
Voltage fluctuation — measurement accuracy	±1%
IEC flicker — measurement	Short-term P (Pst), long-term P (Plt)
IEC flicker — measurement mode	According to IEC61000-4-15, calculates Pst (10 min) and Plt (2 hours)
IEC flicker — display mode	Waveform, trend charts
IEC flicker — measuring range	0-20
IEC flicker — measurement accuracy	±5%
Surge current — measurement mode	Recorded when the half-wave RMS current exceeds the set value and the hold time is 10ms-1min
Surge current — display mode	Maximum surge current and surge current waveform
Surge current — measurement accuracy	0.10%
Voltage swell — criterion	When the half-wave RMS voltage is higher than the set value and the hold time is 10ms-1min, it is judged as a swell
Voltage sag — criterion	When the half-wave RMS voltage is lower than the set value and the hold time is 10ms-1min, it is judged as a sag
Voltage swell, voltage sag, DIP — measurement accuracy	0.10%
Instrument size	263mm x 168mm x 65mm
Weight	2 kg
Power supply — input voltage	110V-240V
Power supply — adapter output	15V, 3A
Battery	Rechargeable nickel-metal hydride, 4500mAh
Battery working time	4h
Battery charging time	5h (ambient temperature 25°C)
Power saving	Adjustable LCD backlight brightness; adjustable standby time
Display — size	112.8 x 84.6mm
Display — colors	260,000 colors
Display — resolution	640 x 480
Display — brightness	Max 350 cd/m2 (typ.), adjustable brightness
Display — contrast	500:1 (typ.)
Display — viewing angle	70/70/50/70 (typ.) (CR ≥10) (left/right/up/down)
Storage — type	TF card (built-in)
Storage — size	8G
Standard — measurement method	IEC 61000-4-30
Standard — measurement performance	IEC 61000-4-30, level A
Standard — flicker	IEC 61000-4-15
Standard — harmonics	IEC 61000-4-7
Safety — standard	GB 4793.1-2007/IEC 61010-1:2001: “Safety requirements for electrical equipment for measurement, control and laboratory use”, part 1: general requirements. Safety level: CAT III 1000 V/ CAT IV 600 V
Safety — maximum phase input voltage	CAT III 1000V/CAT IV 600V
Environmental conditions — operation	0°C to +45°C, humidity below 90rh%
Environmental conditions — storage	-20°C to +50°C, humidity below 95rh% (non-condensing)